Thanks for visiting Sewing Machine Repairs. Remember to bookmark this page Brother Sewing 6800.
 Brother® LB-6800THRD Computerized Sewing and Embroidery Machine US $488.30 
|
 Brother LB6800PRW - Project Runway Computerized Embroidery and Sewing Machine US $359.95
|
 Brother Computerized Sewing/Embroidery Machine LB6800PRW US $359.99
|
 Brother LB-6800THRD Computerized Sewing and Embroidery Machine + FREE BONUS PACK US $433.95
|
 Brother LB-6800THRD Computerized Sewing and Embroidery Machine US $468.88
|
 Brother LB-6800THRD Computerized Sewing and Embroidery Machine US $468.88
|
 Brother DELUXE Custom Built Sew Steady Large Table 18 X 24 with FREE Travel Bag US $124.50
|
 Brother Computerized Sewing Embroidery Machine Crafts USB 6800 NEW US $509.50
|
 Brother® LB-6800THRD Computerized Sewing Embroidery Machine 4"X4" Embroidery US $506.98
|
 Brother LB-6800THRD Computerized Sewing Machine & BONUS US $467.99
|
 BROTHER LB6800-PRW LB6800PRW EMBROIDERY SEWING MACHINE US $469.00
|
 BROTHER LB-6800 PRW LB6800PRW EMBROIDERY SEWING MACHINE US $467.00
|
 Brother LB6800PRW Project Runway Computerized Embroidery and Sewing Machine US $448.50
|
Brother Sewing 6800
If you are looking for a different item here are a list of related products on Sewing Machine Repairs, please check out the following:
Frequently Asked Questions...
How to get sewing machine's auto thread cutter to work right?
I have a Brother LB-6800 PRW sewing/embroidery machine. I have only had it a few days, and now the auto thread cutter isn't working right. It will cut the bobbin thread but not the top thread. Earlier it did get jammed up while doing an embroidery design, but seemed to work fine after we cleared it out. Now it isn't cutting the top thread on embroidery or standard sewing when manually pushed or set to do automatically. I have tried to adjust the tension but doesn't seem to make a difference in the thread cutting.
Have removed the bobbin and case, vacuumed entire area. It is still only cutting the bobbin thread. I did get it to cut the top thread only a couple of times while needle was in "middle" position instead of far left or far right. but 99% of the time it will not cut the top thread. And the cutting blade looks ok.
Answer:
Don't screw with the tension.
Somewhere in the bobbin shuttle there is a bit of thread from when it jammed up doing embroidery. Take out the bobbin and remove the shuttle. Vacuum everything